Ten - Prices from �394.60

�0.00

For projecting and non-projecting up-and-over doors up to 8m2 (up to 14m2 using 2 motors), and jointed doors.
24Vdc electromechanical gear-motor with BlueBUS technology (TN2010) that enables users to connect the photocell couples and control unit using just two wires.

Three versions: with incorporated control unit, force regulator and absolute encoder (TN2010); with incorporated control unit and receiver, electromechanical limit switch (TN2030); and without control unit (TN2020).

Energy saving: the system enter into standby when not in use (TN2010).

Practical: the control unit and PS324 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor (TN2010).

Safe: obstacle detection system and monitoring of the motor absorption during movement, self-diagnosis by means of a flashing light, courtesy light.

CODE	DESCRIPTION
TN2010	Irreversible, 24Vdc, with incorporated control unit, courtesy light, absolute encoder and BlueBUS technology.
TN2030	Irreversible, 24Vdc, with incorporated control unit and receiver, courtesy light, and electromechanical limit switch.
TN2020	Irreversible, 24Vdc, with courtesy light, without incorporated control unit.

Technical Specifications	TN2010	TN2030	TN2020
Power supply (Vac 50Hz)	230	230	230
Emergency power supply	PS324	-	-
Line absorption (A)	1.2	1	1.4
Absorbed power (W)	250	220	330
Protection class (IP)	44	44	44
Max. torque (Nm)	320	320	420
Speed (Rpm)	1.7	1.7	1.7
Operating temperature (∘C)	-20/+50	-20/+50	-20/+50
Insulation class (%)	1	1	F
Working cycle (cycles/day)	100	100	100
Dimensions (mm)	512x150x158	512x150x158	512x150x158

Accessories:

TNA1                      TNA2                         PS324
Spare control           Spare control unit          24V battery with
unit for                   for TN2010                    built-in battery
TN2030                                                     charger.

OTA2                      OTA3                          OTA9
Motor support          Motor support               Motor support
bracket                   bracket                        bracket
(1250mm long)         (2000mm long)          (520mm long)

TNA5                       TNA6                        TNA8
Pair of standard        Pair of standard           20x20mm drive
straight                   curved telescopic      shaft (200mm
telescopic arms      arms                      long)

TNA4                      OTA11                       OTA12
20x20mm drive         Kit for unlock from        Kit for external
shaft (1500mm         the inside with          unlocking with
long)                      metal cord                  key ratchet (cannot
                                                             be used with laterally
                                                             installed motors)

TNA38                   TS
Driving device         Signboard
for transmission
shafts.

Ten - Prices from �394.60

Shop > Our Garage and Industrial Door Automation > Residential Use

Ten - Prices from �394.60