Signo - Prices from £1277.65

£0.00

For private, public and industrial car parks.
Electromechanical barrier gate operator with encoder.

Powerful and quick: electromechanical 24Vdc gear motor, 300W power and up to 250Nm torque. It opens up completely (90∘) in just 1.8 seconds (Signo3), 3 seconds (Signo4), 6 seconds (Signo6). Models with a 230Vac or 110Vac power supply.

Even more sophisticated and well-developed new control unit. The same for all models, it automatically recognizes and memorizes the Signo model on which it is installed thereby eliminating the first installation procedure.
Signals that the power supply is correct when started and that the control unit is functioning correctly.

Intelligent: the manoeuvre will invert automatically if the bar comes into contact with an obstacle. The control unit automatically corrects any eventual lack of balance linked to variations in the climate or poor installation.

Safe: the innovative control unit utilises  a revolutionary management system of the force, speed, acceleration and deceleration  that can be programmed at 6 levels, at the beginning and at the end of the manoeuvre.

Exclusive functions:

• The barrier will close immediately after the vehical has passed through.
• It has two types of traffic-light type signals.
• There is an automatic saftey test at the beinning of each manoeuvre.
• Constantresistance STOP input for connecting the latest generation of sensitive edges.
• There is a maoeuvre counter and it is possible to programme the maintenance alarm threshold.

Intensive use: The new 24Vdc gear motor Signo can be used intensively for long periods of time. This characteristic makes it ideal for automating private, public or industrial car-parks which are subjected to the frequent passage of vehicles during the day.

CODE	DESCRIPTION
SIGNO3	for bars up to 3m, irreversible 230Vac, 24Vdc motor, with galvanised steel painted case, supplied base plate.
SIGNO3I	for bars up to 3m, irreversible 230Vac, 24Vdc motor, with satin stainless steel case, supplied base plate.
SIGNO4	for bars up to 4m, irreversible 230Vac, 24Vdc motor, with galvanised steel painted case, supplied base plate.
SIGNO4I	for bars up to 4m, irreversible 230Vac, 24Vdc motor, with satin stainless steel case, supplied base plate.
SIGNO6	for bars up to 4m, irreversible 230Vac, 24Vdc motor, with galvanised steel painted case, supplied base plate.

SIGNO 6I

for bars up to 6m, irreversible 230Vac, 24Vdc motor, with satin stainless steel case, supplied base  plate.

Technical specifications	SIGNO3 SIGNO3I	SIGNO4 SIGNO4I	SIGNO6 SIGNO6I
Power (Vac 50/60Hz)	230	230	230
Current absorbed (motor) (Adc)	10	12	12
Power absorbed (W)	250	300	300
Protection level (IP)	44	44	44
Reduction ratio	1/123	1/241	1/241
Torque  (Nm)	130	200	250
Min. - max opening time  (s)	1.8/4	3/6	6/10
Working temp. (∘C min/max)	-20/+50	-20/+50	-20/+50
Insulation Class	1	1	1
Work Cycle (%)	80	80	80
Dimensions (mm)	320x1070x320	320x1070x320	320x1070x320
Hole (mm)	25.5	25.5	25.5

Accessories for SIGNO3 / SIGNO3I:

SIA1                      SIA3                    WA2
Anchorage base      Aluminium bar      8m pack of red
with clamps           painted white        shockproof strips
                            36x73x3250mm    with caps to close
                                                        SIA3 bar.

WA25                                        
pivoting                       
connection for      
rectangular bars   
up to 4m


Accessories for SIGNO4 / SIGNO4I:


WA1                    WA2                      WA3
Aluminium bar                                     Tubular Aluminium
painted white                                       arm
36x73x4250mm

WA4                      WA13                       WA14          
Connection for       Aluminium rack          Joint for rods WA1
the WA3 bar          (2m) for WA1, WA21
                            WA22 bars.

SIA1                     WA25



Accessories for SIGNO6 / SIGNO6I:

WA21                     WA22                      WA6
Aluminium bar        Modular bar,             12m pack of red
painted white          plus joint, painted    shockproof rubber
36x94x6250mm      White.                     strips.


WA24                     WA7                        WA8
Tubular                  Tubular aluminium     Connection for the
telescopic bar         bar, painted white      WA7 bar
in white painted      suitable where there
aluminium. max.     are strong winds.
length 8.5m


WA13                     SIA2
                             Anchorage base
                             with clamps


Common accessories:

WA9                         WA10                     WA11        
Pack of 6 flashing      Red adhesive           Adjustable stand
signals.                    reflector strips         for bars


WA12                       PS224                     SIA20
Mobile stand             24Vdc buffer            Spare control unit
for bars                    battery

PO
support bracket